Phoenix Battery Commander Pro BS1943E

For the storage and charging of all Lithium-Ion batteries up  to 25kgs.

Providing a secure storage and charging solution tailored for Lithium-Ion batteries, mitigating the myriad of risks posed by such batteries, including thermal runaway due to temperature fluctuations, impact, or manufacturing defects. A guard against spontaneous ignition and formidable fire outbreaks, that pose significant challenges to extinguish.

UK Police approved (Secured By Design scheme) certified for fire resistance, impact resistance, and security

FIRE PROTECTION (INSIDE TO OUTSIDE) – VDMA 24994:2024-08 Certified for a maximum single battery of 2500Wh (BS1941) to 4750Wh (BS1946)* and total capacity from 2500Wh (BS1941) to 19000Wh (BS1946).* See table for detailed capacity per model.

FIRE PROTECTION (OUTSIDE TO INSIDE) – Tested to EN 14470-1 – Fire protection for 90 minutes from outside to in. NT Fire 017-120p certified. 

DROP TEST – Fire and impact tested from 9.1 metres for resistance to the impact of falling through the burning floors of a building.

CHARGING –Fitted power points – 2 x 4 gang PDUs, 8 sockets, with the option to add further PDUs to the pre-wired control box. Further 13 AMP Mains Supply or Three Phase can be added (POA).

VENTILATION – Fitted as standard with air exhaust duct, for added ventilation. Dedicated ducting to the outside is also strongly recommended for the most secure and safe extraction in the event of thermal runaway.

SHELVING – Supplied with reinforced and insulated height adjustable shelves capable of carrying 100kg at a time.

TEMPERATURE MONITOR – For safety, the cabinet comes as standard with an external temperature warning lamp, that gives an early warning of a potential issue with a battery overheating. In the event of excessive heat inside the cabinet, the control unit immediately cuts power to chargers and sounds an alarm.

DOOR ALARM – The doors are fitted with sensors to prevent the doors being left open. In the event the doors are left open, the power will be cut, and no charging will take place. A buzzer will also sound to warn you.

FIRE ALARM CONNECTION – The control unit can be connected to the building fire alarm to trigger the building system and alert the fire brigade.

SIREN & STROBE – The unit is fitted with a siren and strobe light that is triggered in the event of overheat or thermal runaway. Power to the cabinet will also be cut and no charging will take place until the cabinet is back in normal working range.

WARNING LABELS – Fitted with warning labels in accordance with ISO 3864 and ISO 7010, as well as the European directive 92/58/EEC.

MULTIPOINT LOCKING – Fitted with an advanced reinforced multipoint locking system that securely seal the doors. Even in the event of the most severe battery explosion, the doors will remain securely closed.

CONSTRUCTION – Double wall safe construction with internal fill of patented Styronite F insulation.

LOCKING - Fitted with an advanced high security electronic lock with clear LED display, dual control, hidden code and scrambled code that can be programmed as standard.

Two-year materials and labour warranty.